Tuesday 11 June 2019

Ahoy there!

With the the 75th Anniversary of D-Day safely negotiated and James' triumph of a lecture to the school done, I have time to reflect on a couple of other pieces that went into making the project such a success.  During his research, James kept coming across reference to at least two German gunboats that were involved in the action around Pegasus Bridge.  If you look into this, and trust me we did, there are conflicting accounts as to what they might actually have been.  A common thought was that they were civilian trawlers requisitioned by the Kriegsmarine and fitted out as Flakships.  The Vorpostenboote, as they were known, were a common sight around coastal areas and so we thought it highly possible that these might have been the boats referred to in the eyewitness accounts.
"We could build some", said James.  This was becoming an all too familiar cry at this stage and I have learnt that the best thing to do in these situations is to buckle up and enjoy the ride!  We didn't have an awful lot of reference material to work with, a few grainy photographs care of the info web, was seemingly as much as we could hope for.  By chance, James stumbled across a picture of a 20mm scaled armed German Trawler available from 'Grubby Tanks' and now with a pre-conceived idea of what he was aiming for, off he went!

Within hours the prototype was produced and it was already apparent to me that this was going to be a bit of a showstopper.  James was really enjoying the design process, but also the idea of minimalising waste, designing his drawing to fit on to one sheet of 2mm MDF.
James very kindly put the basic carcass together for me, cut himself a second boat, and so it was that we parted for the Easter holidays.  With the boat safely docked on the painting table, I was suddenly faced with all manner of decisions to finish off the project.  There was so much delicious detail to work with when it came to painting, but I still had a couple of things to fix first.   
The forward gun platform required the addition of some cocktail sticks and these were also employed for the bridge's hand rail, with the addition of some plastic strip.  The plastic wasn't an ideal fix, but at this stage I was considering adding flak barriers made from Milliput so wasn't unduly worried.  

I fashioned a hold hatch out of mount board, which was also used for the hull.  Whilst I had the Milliput out, I considered the idea of adding some rope fenders.  These were to be attached using the wire hoods found on Prosecco corks, but just couldn't get the right shape and so resorted to wooden beads instead.  I salvaged some resin chandlery from the bits box along with some oil drums.  A pole for the ensign was fixed and with the addition of some armaments from the very reasonably priced 'Anyscale Models', the basic construction was complete.

It was at this point that we had to return to school and compare homework, so to speak.  James had fashioned a funnel from some copper pipe, heating a ball bearing to force into one end to create a beautifully fluted look.  He had very kindly done one for me and I managed to persuade him to cut some additional pieces for the handrail following my abortive Milliput episode.  We also discussed the gun emplacements and deciding that I was going to use my boat for all manner of pulp adventures, quite fancied the ability to swap out the pieces as required.  In no time at all James had cut discs capable of holding magnets to facilitate this very idea. 
With some final flourishes, including a ship's whistle and a liberal smattering of rivets, the build was complete and the boat was given its final base coat.
I stared to carefully pick out the various details in colour and was thrilled with the progress, but something didn't feel quite right.  It wasn't until the night before we had arranged to photograph the entire model that I realised what it was that was troubling me - the boat was too clean!  Weathering is always a concern, when does it become too much?  Still resolved to give it a go, I started working in around the areas I thought would be caught first.  
 So with the boat completed the crew, from 'Artizan Designs', were able to step aboard and my Vorpostenboot set sail for Pegasus Bridge.
This was such a joy to work on and once again, I can't thank James enough for his generosity.  I am thoroughly looking forward to seeing how this marvellous model will be put to use in the future.


48 comments:

  1. My word that's impressive!!!

    ReplyDelete
  2. A clever build and a fantastic realisation, boat and crew...Superb!

    ReplyDelete
  3. And `cool Dad of the year' award goes to !!!

    ReplyDelete
  4. Wow.
    Just wow.
    That is a seriously impressive project and brilliantly executed.

    ReplyDelete
    Replies
    1. Thank you so much Mike. It was amazing to see the idea come together from concept to finished model.

      Delete
  5. What a fantastic build and finish, awesome!
    Best Iain

    ReplyDelete
    Replies
    1. Thank you so much Iain, it was such a thrill to work on.

      Delete
  6. Replies
    1. Thank you Tamsin, not quite as big as Lady Sarah, but a worthy addition to an flotilla.

      Delete
  7. Very impressive boat, I loved to read on how it came together and the final result is simply breathtaking.

    ReplyDelete
    Replies
    1. Thank you so much Wouter, I couldn't believe how quickly James went from concept to prototype, amazing to watch.

      Delete
  8. Replies
    1. Thank you so much Ivor, that is very kind of you.

      Delete
  9. An excellent kit! That would be quite useful for some pulp gaming as well!

    ReplyDelete
    Replies
    1. Thank you Terry, I could certainly see it being used for Pulp gaming, which is why I was keen to be able to switch out the armaments. James' version was rigged and I might have to try to do that a some point.

      Delete
  10. Can't really think of anything that hasn't already been said. Brilliant by both of you guys!

    ReplyDelete
  11. That is brilliant. The uses for Pulp gaming is excellent.

    ReplyDelete
    Replies
    1. Thank you Simon, lots of voyages to the Lost World perhaps?

      Delete
  12. Very inspirational! Masterfully done!

    ReplyDelete
  13. Fantastic, you have certainly done justice to your friend's very impressive effort in creating this kit. Well done!

    ReplyDelete
    Replies
    1. Thank you so much Kym, it was a joy to work on.

      Delete
  14. I've seen lots of MDF that just looks like MDF, you've changed the basic uninspiring material into a brilliant believable model ship. Very impressed with the level of detail and not a little envious.

    ReplyDelete
    Replies
    1. You are absolutely right some MDF models just don't feel right. I think the success of this one is down to James' design.

      Delete
  15. Beautiful boat ...but a bit much for me ! To attempt

    ReplyDelete
    Replies
    1. Surely not Matt, but thank you nonetheless.

      Delete
  16. I reckon the boat could be a going concern if put up,for sale you know.. it’s got lots f options . I like your magnetised swap out idea . Wonderfully done as well

    ReplyDelete
    Replies
    1. I'd be lying if I said that we hadn't thought about it. Perhaps a plan to finance the next build?

      Delete
  17. It's a beautiful model, enhanced greatly by your brush-work.

    ReplyDelete
    Replies
    1. Thank you Joe, such a great piece to work on.

      Delete
  18. Absolutely fantastic work. Only thing I would recommend you add is sea salt effects. However it looks good as is.

    ReplyDelete
    Replies
    1. Thank you, now tell me more about these sea salt effects - sounds great.

      Delete

Related Posts Plugin for WordPress, Blogger...