Season 10, Episode 5
Following the successful formula of the previous build, a second miniature was constructed and painted in suitably chilly shades of blue and placed within a makeshift mould constructed from scraps of plasticard and secured with a hot glue gun. Possessed of UV resin and a wholly unjustified degree of confidence, I began pouring the first layers.
The plan was simple, the execution, less so. The resin was carefully tinted and layered as intended until a steady stream of bubbles began emerging from beneath Cavey's arm. At first I was puzzled. Then enlightenment dawned. The peanut was hollow! The resin was entering the shell and the trapped air was escaping. I am not ashamed to admit that this revelation arrived several minutes later than it probably should have. Still, by this point, I was committed to the process and elected to persevere. A few bubbles could surely be explained away as imperfections within ancient glacial ice? Unfortunately, the resin had not yet finished teaching me valuable life lessons.
Despite knowing perfectly well that these procedures should not be rushed, I removed the shuttering too early and promptly released partially cured resin across the workbench with consequences that can best be described as educational. Following a brief period of reflection, several cups of Earl Grey and a stern conversation with myself regarding the virtues of patience, the resin was left alone to cure properly.
The resulting block required some considerable tidying up and at this point I encountered another of life’s great ponderables, how did all those impossibly talented social media resin wizards manage to restore crystal clarity after sanding? The answer, it transpired, was more resin. A final coating restored the transparency beautifully and although some bubbles remained visible, these were ultimately disguised with snow effects around the top and base where they now appear entirely intentional; sweet serendipity shines again.









Fantastic work - and well done for sticking with it !
ReplyDeleteMaybe it's the schoolboy in me that Cavey brings forth, but one of those pictures did look like Cavey was deliberately expelling air from an orifice which shall not be named. Fortunately it was the combination of schoolboy and camera angle - Cavey would not be so uncouth, I'm sure.
Excellent work on ice block Cavey, and the block itself very cool looking.
ReplyDeleteIf ever playing with resin, patience means less costly mistakes, also to make clear and shiney, try wet and dry paper to get smooth, and then a layer of gloss varnish will work, you can also use matt varnish, if a matt finish is required.
Haha! I absolutely love this mate, smashing stuff.
ReplyDeleteCheers Roger